Marshall Electronics has joined forces with high-end pan/tilt head designer BR Remote, to design and build a micro P/T head, the CV-PT-HEAD, for Marshall miniature cameras. The new P/T head is compatible with all Marshall 500 series cameras including the CV503, CV503-WP, CV506, CV506-H12, CV565 and CV566.

“BR Remote makes very high-tech remote heads for film and television, and this collaboration leverages the strengths of both companies to create a really unique miniature camera pan/tilt head solution,” says Tod Musgrave, Director of Cameras at Marshall Electronics. “The team at BR Remote were very easy to work with and we are really impressed with the finished product and how it interacts with our miniature cameras. The CV-PT-HEAD camera system can fit in the palm of your hand, and when used with the CV-MICRO-JYSTK passes power and control to the camera using the Lemo to Hirose cable included in box. We are highly motivated to continue to add more and more camera models in different configurations as well as forge relationships with highly skilled designers that can enhance the Marshall camera value proposition.”

The CV-PT-HEAD body is less than 3.5-inches tall and less than 2-inches wide creating one of the smallest P/T footprints available. The CV-PT-HEAD comes with an IP65 weatherproof rating, which means it is dust-tight and protected against water under pressure from any angle. When paired with Marshall’s weatherproof CV503-WP camera, the CV-PT-HEAD creates an excellent movable camera position that can be left out in wet and dirty environments. There is a built-in camera power supply delivering a constant 12V to the camera socket as well as camera control data. The input voltage is from 12V to 35V allowing operators to run up to 3,000 feet with a common 4-pin XLR cable. Unique for a small head, the input socket for power and control data is on the fixed base. This allows for better freedom of movement, with the camera socket on the moving part with the camera.

http://www.marshall-usa.com